Mercedes-Benz Trucks Actros 1996-2002 310 313bhp remap figures
The Mercedes-Benz Trucks Actros 310 313bhp (1996-2002) is a diesel 11.9L model making 313bhp and 1529Nm as standard. After a Stage 1 ECU remap we expect 366bhp and 1765Nm - up to 53bhp and 236Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 313 bhp | 366 bhp | +53 bhp |
| Torque | 1529 Nm | 1765 Nm | +236 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 313 bhp | 1529 Nm | |
| Stage 1Maximum software-only performance | 366 bhp | 1765 Nm | +53 bhp +236 Nm |
| Stage 1 EcoPerformance with economy in mind | 353 bhp | 1746 Nm | +40 bhp +217 Nm |
| Eco mapEconomy first | 349 bhp | 1734 Nm | +36 bhp +205 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Actros
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
This car is listed with a Temic engine control unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Mercedes-Benz Trucks Actros 310 313bhp?
We expect 366bhp and 1765Nm against 313bhp and 1529Nm as standard: up to +53bhp and +236Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Mercedes-Benz Trucks Actros 310 313bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 353bhp and 1746Nm expected. The Eco map is economy first: 349bhp and 1734Nm. Both still sit above the standard 313bhp and 1529Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Mercedes-Benz Trucks Actros figures
Other diesel variants
- 320 320bhp 2004-2009
- 350 353bhp 1996-2002
- 360 360bhp 2004-2009
- 400 394bhp 1996-2002
- 410 408bhp 2004-2009
- 430 428bhp 2004-2009
- 440 435bhp 2004-2009
- 460 455bhp 2004-2009
- 480 476bhp 2004-2009
- 480 480bhp 1996-2002
All diesel Actros variants · Actros 1996> overview · All Mercedes-Benz Trucks figures