Mercedes-Benz Trucks Actros 2004-2009 430 428bhp remap figures
The Mercedes-Benz Trucks Actros 430 428bhp (2004-2009) is a diesel 11.9L model making 428bhp and 2000Nm as standard. After a Stage 1 ECU remap we expect 495bhp and 2305Nm - up to 67bhp and 305Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 428 bhp | 495 bhp | +67 bhp |
| Torque | 2000 Nm | 2305 Nm | +305 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 428 bhp | 2000 Nm | |
| Stage 1Maximum software-only performance | 495 bhp | 2305 Nm | +67 bhp +305 Nm |
| Stage 1 EcoPerformance with economy in mind | 478 bhp | 2281 Nm | +50 bhp +281 Nm |
| Eco mapEconomy first | 473 bhp | 2265 Nm | +45 bhp +265 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Actros
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Temic. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Mercedes-Benz Trucks Actros 430 428bhp?
We expect 495bhp and 2305Nm against 428bhp and 2000Nm as standard: up to +67bhp and +305Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Mercedes-Benz Trucks Actros 430 428bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 478bhp and 2281Nm expected. The Eco map is economy first: 473bhp and 2265Nm. Both still sit above the standard 428bhp and 2000Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Mercedes-Benz Trucks Actros figures
Other diesel variants
- 440 435bhp 2004-2009
- 410 408bhp 2004-2009
- 460 455bhp 2004-2009
- 400 394bhp 1996-2002
- 480 476bhp 2004-2009
- 480 480bhp 1996-2002
- 360 360bhp 2004-2009
- 350 353bhp 1996-2002
- 500 503bhp 2003-2005
- 510 510bhp 2011>
All diesel Actros variants · Actros 1996> overview · All Mercedes-Benz Trucks figures