Mercedes-Benz Vito (W447) 2020> 110 CDi (1.75L EU6) 100bhp remap figures
Stock, this 2020> Mercedes-Benz Vito diesel (1.7L) produces 100bhp and 270Nm. Our expected figures for a Stage 1 remap are 139bhp and 335Nm, an expected gain of up to 39bhp and 65Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 100 bhp | 139 bhp | +39 bhp |
| Torque | 270 Nm | 335 Nm | +65 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 100 bhp | 270 Nm | |
| Stage 1Maximum software-only performance | 139 bhp | 335 Nm | +39 bhp +65 Nm |
| Stage 1 EcoPerformance with economy in mind | 129 bhp | 330 Nm | +29 bhp +60 Nm |
| Eco mapEconomy first | 126 bhp | 327 Nm | +26 bhp +57 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Vito
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Bosch MD1CS006. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Mercedes-Benz Vito 110 CDi (1.75L EU6) 100bhp?
We expect 139bhp and 335Nm against 100bhp and 270Nm as standard: up to +39bhp and +65Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Mercedes-Benz Vito 110 CDi (1.75L EU6) 100bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 129bhp and 330Nm expected. The Eco map is economy first: 126bhp and 327Nm. Both still sit above the standard 100bhp and 270Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Mercedes-Benz Vito figures
Other diesel variants
- 111 CDi (2.1L EU5) 112bhp 2015-2019
- 109 CDi (2.1L EU5) 87bhp 2015-2019
- 114 CDi (1.75L EU6) 134bhp 2020>
- 116 CDi (2.0L EU6) 160bhp 2020>
- 116 CDi (2.1L EU5) 161bhp 2015-2019
- 119 CDi (2.0L EU6) 187bhp 2020>
- 119 CDi (2.1L EU5) 187bhp 2015-2019
All diesel Vito (W447) variants · Vito (W447) 2015> overview · All Mercedes-Benz figures