Mercedes-Benz CLK (C209) 2002-2009 270 CDi 170bhp remap figures
Thinking of remapping a Mercedes-Benz CLK 270 CDi 170bhp? The standard car makes 170bhp and 400Nm; with a Stage 1 remap from our Leicester workshop we expect around 230bhp and 499Nm, up to +60bhp and +99Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 170 bhp | 230 bhp | +60 bhp |
| Torque | 400 Nm | 499 Nm | +99 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 170 bhp | 400 Nm | |
| Stage 1Maximum software-only performance | 230 bhp | 499 Nm | +60 bhp +99 Nm |
| Stage 1 EcoPerformance with economy in mind | 215 bhp | 491 Nm | +45 bhp +91 Nm |
| Eco mapEconomy first | 210 bhp | 486 Nm | +40 bhp +86 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your CLK
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Bosch EDC15C6 unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Mercedes-Benz CLK 270 CDi 170bhp?
We expect 230bhp and 499Nm against 170bhp and 400Nm as standard: up to +60bhp and +99Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Mercedes-Benz CLK 270 CDi 170bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 215bhp and 491Nm expected. The Eco map is economy first: 210bhp and 486Nm. Both still sit above the standard 170bhp and 400Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Mercedes-Benz CLK figures
Other diesel variants
All diesel CLK (C209) variants · CLK (C209) 2002-2009 overview · All Mercedes-Benz figures