Massey Ferguson MF7600 2009> 7620 200bhp remap figures
The Massey Ferguson MF7600 7620 200bhp (2009>) is a diesel 6.6L model making 200bhp and 880Nm as standard. After a Stage 1 ECU remap we expect 265bhp and 1048Nm - up to 65bhp and 168Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 200 bhp | 265 bhp | +65 bhp |
| Torque | 880 Nm | 1048 Nm | +168 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 200 bhp | 880 Nm | |
| Stage 1Maximum software-only performance | 265 bhp | 1048 Nm | +65 bhp +168 Nm |
| Stage 1 EcoPerformance with economy in mind | 249 bhp | 1035 Nm | +49 bhp +155 Nm |
| Eco mapEconomy first | 244 bhp | 1026 Nm | +44 bhp +146 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your MF7600
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Bosch EDC17CV44 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Massey Ferguson MF7600 7620 200bhp?
We expect 265bhp and 1048Nm against 200bhp and 880Nm as standard: up to +65bhp and +168Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Massey Ferguson MF7600 7620 200bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 249bhp and 1035Nm expected. The Eco map is economy first: 244bhp and 1026Nm. Both still sit above the standard 200bhp and 880Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Massey Ferguson MF7600 figures
Other diesel variants
- 7619 185bhp 2009>
- 7622 215bhp 2009>
- 7618 175bhp 2009>
- 7624 235bhp 2009>
- 7616 160bhp 2009>
- 7615 150bhp 2009>
- 7626 255bhp 2009>
- 7614 140bhp 2009>
All diesel MF7600 variants · MF7600 2009> overview · All Massey Ferguson figures