Massey Ferguson MF7600 2009> 7615 150bhp remap figures
Stock, this 2009> Massey Ferguson MF7600 diesel (6.6L) produces 150bhp and 660Nm. Our expected figures for a Stage 1 remap are 215bhp and 828Nm, an expected gain of up to 65bhp and 168Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 150 bhp | 215 bhp | +65 bhp |
| Torque | 660 Nm | 828 Nm | +168 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 150 bhp | 660 Nm | |
| Stage 1Maximum software-only performance | 215 bhp | 828 Nm | +65 bhp +168 Nm |
| Stage 1 EcoPerformance with economy in mind | 199 bhp | 815 Nm | +49 bhp +155 Nm |
| Eco mapEconomy first | 194 bhp | 806 Nm | +44 bhp +146 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your MF7600
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Bosch EDC17CV44 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Massey Ferguson MF7600 7615 150bhp?
We expect 215bhp and 828Nm against 150bhp and 660Nm as standard: up to +65bhp and +168Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Massey Ferguson MF7600 7615 150bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 199bhp and 815Nm expected. The Eco map is economy first: 194bhp and 806Nm. Both still sit above the standard 150bhp and 660Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Massey Ferguson MF7600 figures
Other diesel variants
- 7614 140bhp 2009>
- 7616 160bhp 2009>
- 7618 175bhp 2009>
- 7619 185bhp 2009>
- 7620 200bhp 2009>
- 7622 215bhp 2009>
- 7624 235bhp 2009>
- 7626 255bhp 2009>
All diesel MF7600 variants · MF7600 2009> overview · All Massey Ferguson figures