Land Rover Freelander II (LR2) 2006> 2.2 Td4 157bhp remap figures
The Land Rover Freelander II 2.2 Td4 157bhp (2006>) is a diesel 2.2L model making 157bhp and 400Nm as standard. After a Stage 1 ECU remap we expect 204bhp and 505Nm - up to 47bhp and 105Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 157 bhp | 204 bhp | +47 bhp |
| Torque | 400 Nm | 505 Nm | +105 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 157 bhp | 400 Nm | |
| Stage 1Maximum software-only performance | 204 bhp | 505 Nm | +47 bhp +105 Nm |
| Stage 1 EcoPerformance with economy in mind | 192 bhp | 497 Nm | +35 bhp +97 Nm |
| Eco mapEconomy first | 188 bhp | 491 Nm | +31 bhp +91 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Freelander II
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Bosch EDC16CP39 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Land Rover Freelander II 2.2 Td4 157bhp?
We expect 204bhp and 505Nm against 157bhp and 400Nm as standard: up to +47bhp and +105Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Land Rover Freelander II 2.2 Td4 157bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 192bhp and 497Nm expected. The Eco map is economy first: 188bhp and 491Nm. Both still sit above the standard 157bhp and 400Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Land Rover Freelander II figures
Other diesel variants
All diesel Freelander II (LR2) variants · Freelander II (LR2) 2006> overview · All Land Rover figures