Land Rover Freelander II (LR2) 2006> 2.2 SD4 187bhp remap figures
Thinking of remapping a Land Rover Freelander II 2.2 SD4 187bhp? The standard car makes 187bhp and 420Nm; with a Stage 1 remap from our Leicester workshop we expect around 238bhp and 512Nm, up to +51bhp and +92Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 187 bhp | 238 bhp | +51 bhp |
| Torque | 420 Nm | 512 Nm | +92 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 187 bhp | 420 Nm | |
| Stage 1Maximum software-only performance | 238 bhp | 512 Nm | +51 bhp +92 Nm |
| Stage 1 EcoPerformance with economy in mind | 225 bhp | 505 Nm | +38 bhp +85 Nm |
| Eco mapEconomy first | 221 bhp | 500 Nm | +34 bhp +80 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Freelander II
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Bosch EDC17CP42 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Land Rover Freelander II 2.2 SD4 187bhp?
We expect 238bhp and 512Nm against 187bhp and 420Nm as standard: up to +51bhp and +92Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Land Rover Freelander II 2.2 SD4 187bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 225bhp and 505Nm expected. The Eco map is economy first: 221bhp and 500Nm. Both still sit above the standard 187bhp and 420Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Land Rover Freelander II figures
Other diesel variants
All diesel Freelander II (LR2) variants · Freelander II (LR2) 2006> overview · All Land Rover figures