Iveco EuroCargo 2002-2008 5.9l E25 250bhp remap figures
The Iveco EuroCargo 5.9l E25 250bhp (2002-2008) is a diesel 5.9L model making 250bhp and 850Nm as standard. After a Stage 1 ECU remap we expect 290bhp and 974Nm - up to 40bhp and 124Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 250 bhp | 290 bhp | +40 bhp |
| Torque | 850 Nm | 974 Nm | +124 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 250 bhp | 850 Nm | |
| Stage 1Maximum software-only performance | 290 bhp | 974 Nm | +40 bhp +124 Nm |
| Stage 1 EcoPerformance with economy in mind | 280 bhp | 964 Nm | +30 bhp +114 Nm |
| Eco mapEconomy first | 277 bhp | 958 Nm | +27 bhp +108 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your EuroCargo
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
Engine management is by a Bosch EDC7C1/C2 unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Iveco EuroCargo 5.9l E25 250bhp?
We expect 290bhp and 974Nm against 250bhp and 850Nm as standard: up to +40bhp and +124Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Iveco EuroCargo 5.9l E25 250bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 280bhp and 964Nm expected. The Eco map is economy first: 277bhp and 958Nm. Both still sit above the standard 250bhp and 850Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Iveco EuroCargo figures
Other diesel variants
- 5.9l E24 240bhp 2002-2008
- 5.9l E28 280bhp 2002-2008
- 5.9l E22 217bhp 2002-2008
- 5.9l E21 210bhp 2002-2008
- 5.9l E30 300bhp 2002-2008
- 5.9l E18 182bhp 2002-2008
- 3.9l E17 170bhp 2002-2008
- 3.9l E16 160bhp 2002-2008
- 3.9l E15 150bhp 2002-2008
- 3.9l E14 140bhp 2002-2008
All diesel EuroCargo variants · EuroCargo 2002-2008 overview · All Iveco figures