Hyundai Veloster 2012> 1.6 GDi 138bhp remap figures
The Hyundai Veloster 1.6 GDi 138bhp (2012>) is a petrol 1.6L model making 138bhp and 167Nm as standard. After a Stage 1 ECU remap we expect 153bhp and 185Nm - up to 15bhp and 18Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 138 bhp | 153 bhp | +15 bhp |
| Torque | 167 Nm | 185 Nm | +18 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 138 bhp | 167 Nm | |
| Stage 1Maximum software-only performance | 153 bhp | 185 Nm | +15 bhp +18 Nm |
| Stage 1 EcoPerformance with economy in mind | 149 bhp | 184 Nm | +11 bhp +17 Nm |
| Eco mapEconomy first | 148 bhp | 183 Nm | +10 bhp +16 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Veloster
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
Engine management is by a Bosch ME17.9.8 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Hyundai Veloster 1.6 GDi 138bhp?
We expect 153bhp and 185Nm against 138bhp and 167Nm as standard: up to +15bhp and +18Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Hyundai Veloster 1.6 GDi 138bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 149bhp and 184Nm expected. The Eco map is economy first: 148bhp and 183Nm. Both still sit above the standard 138bhp and 167Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Hyundai Veloster figures
Other petrol variants
All petrol Veloster variants · Veloster 2012> overview · All Hyundai figures