Hyundai Santa Fe 2012> 2.2 CRDi 194bhp remap figures
Stock, this 2012> Hyundai Santa Fe diesel (2.2L) produces 194bhp and 437Nm. Our expected figures for a Stage 1 remap are 232bhp and 486Nm, an expected gain of up to 38bhp and 49Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 194 bhp | 232 bhp | +38 bhp |
| Torque | 437 Nm | 486 Nm | +49 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 194 bhp | 437 Nm | |
| Stage 1Maximum software-only performance | 232 bhp | 486 Nm | +38 bhp +49 Nm |
| Stage 1 EcoPerformance with economy in mind | 223 bhp | 482 Nm | +29 bhp +45 Nm |
| Eco mapEconomy first | 219 bhp | 480 Nm | +25 bhp +43 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Santa Fe
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
This car is listed with a Bosch EDC17CP14 engine control unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Hyundai Santa Fe 2.2 CRDi 194bhp?
We expect 232bhp and 486Nm against 194bhp and 437Nm as standard: up to +38bhp and +49Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Hyundai Santa Fe 2.2 CRDi 194bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 223bhp and 482Nm expected. The Eco map is economy first: 219bhp and 480Nm. Both still sit above the standard 194bhp and 437Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Hyundai Santa Fe figures
Other diesel variants
All diesel Santa Fe variants · Santa Fe 2012-2018 overview · All Hyundai figures