Hyundai Santa Fe 2006-2012 2.2 CRTD 148bhp remap figures
The Hyundai Santa Fe 2.2 CRTD 148bhp (2006-2012) is a diesel 2.2L model making 148bhp and 335Nm as standard. After a Stage 1 ECU remap we expect 192bhp and 424Nm - up to 44bhp and 89Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 148 bhp | 192 bhp | +44 bhp |
| Torque | 335 Nm | 424 Nm | +89 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 148 bhp | 335 Nm | |
| Stage 1Maximum software-only performance | 192 bhp | 424 Nm | +44 bhp +89 Nm |
| Stage 1 EcoPerformance with economy in mind | 181 bhp | 417 Nm | +33 bhp +82 Nm |
| Eco mapEconomy first | 177 bhp | 412 Nm | +29 bhp +77 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Santa Fe
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
This car is listed with a Bosch EDC16C39 engine control unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Hyundai Santa Fe 2.2 CRTD 148bhp?
We expect 192bhp and 424Nm against 148bhp and 335Nm as standard: up to +44bhp and +89Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Hyundai Santa Fe 2.2 CRTD 148bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 181bhp and 417Nm expected. The Eco map is economy first: 177bhp and 412Nm. Both still sit above the standard 148bhp and 335Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Hyundai Santa Fe figures
Other diesel variants
All diesel Santa Fe variants · Santa Fe 2006-2012 overview · All Hyundai figures