Ford Ranger 2022> 3.0 V6 EcoBoost 405bhp remap figures
Thinking of remapping a Ford Ranger 3.0 V6 EcoBoost 405bhp? The standard car makes 405bhp and 583Nm; with a Stage 1 remap from our Leicester workshop we expect around 465bhp and 710Nm, up to +60bhp and +127Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 405 bhp | 465 bhp | +60 bhp |
| Torque | 583 Nm | 710 Nm | +127 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 405 bhp | 583 Nm | |
| Stage 1Maximum software-only performance | 465 bhp | 710 Nm | +60 bhp +127 Nm |
| Stage 1 EcoPerformance with economy in mind | 450 bhp | 700 Nm | +45 bhp +117 Nm |
| Eco mapEconomy first | 445 bhp | 693 Nm | +40 bhp +110 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Ranger
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
Engine management is by a Bosch MG1CS036 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Ford Ranger 3.0 V6 EcoBoost 405bhp?
We expect 465bhp and 710Nm against 405bhp and 583Nm as standard: up to +60bhp and +127Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Ford Ranger 3.0 V6 EcoBoost 405bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 450bhp and 700Nm expected. The Eco map is economy first: 445bhp and 693Nm. Both still sit above the standard 405bhp and 583Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Ford Ranger figures
Other petrol variants
All petrol Ranger variants · Ranger 2022> overview · All Ford figures