Ford Puma 2019> ST 1.5 EcoBoost 197bhp remap figures
The Ford Puma ST 1.5 EcoBoost 197bhp (2019>) is a petrol 1.5L model making 197bhp and 320Nm as standard. After a Stage 1 ECU remap we expect 245bhp and 394Nm - up to 48bhp and 74Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 197 bhp | 245 bhp | +48 bhp |
| Torque | 320 Nm | 394 Nm | +74 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 197 bhp | 320 Nm | |
| Stage 1Maximum software-only performance | 245 bhp | 394 Nm | +48 bhp +74 Nm |
| Stage 1 EcoPerformance with economy in mind | 233 bhp | 388 Nm | +36 bhp +68 Nm |
| Eco mapEconomy first | 229 bhp | 384 Nm | +32 bhp +64 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Puma
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
The ECU recorded for this variant is a Bosch MG1CS016. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Ford Puma ST 1.5 EcoBoost 197bhp?
We expect 245bhp and 394Nm against 197bhp and 320Nm as standard: up to +48bhp and +74Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Ford Puma ST 1.5 EcoBoost 197bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 233bhp and 388Nm expected. The Eco map is economy first: 229bhp and 384Nm. Both still sit above the standard 197bhp and 320Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Ford Puma figures
Other petrol variants
All petrol Puma variants · Puma 2019> overview · All Ford figures