Ford Puma 2019> 1.0 EcoBoost mHEV 152bhp remap figures
The Ford Puma 1.0 EcoBoost mHEV 152bhp (2019>) is a petrol 1.0L model making 152bhp and 240Nm as standard. After a Stage 1 ECU remap we expect 182bhp and 286Nm - up to 30bhp and 46Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 152 bhp | 182 bhp | +30 bhp |
| Torque | 240 Nm | 286 Nm | +46 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 152 bhp | 240 Nm | |
| Stage 1Maximum software-only performance | 182 bhp | 286 Nm | +30 bhp +46 Nm |
| Stage 1 EcoPerformance with economy in mind | 175 bhp | 282 Nm | +23 bhp +42 Nm |
| Eco mapEconomy first | 172 bhp | 280 Nm | +20 bhp +40 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Puma
On a turbocharged petrol engine a remap adjusts boost, ignition timing and fuelling together, so both power and mid-range torque rise and the car pulls harder out of corners and junctions.
Engine management is by a Bosch MG1CS017 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Ford Puma 1.0 EcoBoost mHEV 152bhp?
We expect 182bhp and 286Nm against 152bhp and 240Nm as standard: up to +30bhp and +46Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Ford Puma 1.0 EcoBoost mHEV 152bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 175bhp and 282Nm expected. The Eco map is economy first: 172bhp and 280Nm. Both still sit above the standard 152bhp and 240Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Ford Puma figures
Other petrol variants
All petrol Puma variants · Puma 2019> overview · All Ford figures