Ford Focus 2011> 2.0 Turbo ST 246bhp remap figures
Thinking of remapping a Ford Focus 2.0 Turbo ST 246bhp? The standard car makes 246bhp and 361Nm; with a Stage 1 remap from our Leicester workshop we expect around 289bhp and 429Nm, up to +43bhp and +68Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 246 bhp | 289 bhp | +43 bhp |
| Torque | 361 Nm | 429 Nm | +68 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 246 bhp | 361 Nm | |
| Stage 1Maximum software-only performance | 289 bhp | 429 Nm | +43 bhp +68 Nm |
| Stage 1 EcoPerformance with economy in mind | 278 bhp | 424 Nm | +32 bhp +63 Nm |
| Eco mapEconomy first | 275 bhp | 420 Nm | +29 bhp +59 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Focus
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
Engine management is by a Bosch MED17.2 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Ford Focus 2.0 Turbo ST 246bhp?
We expect 289bhp and 429Nm against 246bhp and 361Nm as standard: up to +43bhp and +68Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Ford Focus 2.0 Turbo ST 246bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 278bhp and 424Nm expected. The Eco map is economy first: 275bhp and 420Nm. Both still sit above the standard 246bhp and 361Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Ford Focus figures
Other petrol variants
- 1.5 EcoBoost 179bhp 2014>
- 1.6 EcoBoost 179bhp 2011>
- 1.5 EcoBoost 147bhp 2014>
- 1.6 EcoBoost 147bhp 2011>
- 2.3 Turbo RS 345bhp 2016>
- 1.0 EcoBoost 123bhp 2011>
- 1.0 EcoBoost 98bhp 2011>
- 1.0 EcoBoost 98bhp 2014>
All petrol Focus variants · Focus 2011-2018 overview · All Ford figures