Ford Connect 2014> 1.6 TDCi 113bhp remap figures
Stock, this 2014> Ford Connect diesel (1.6L) produces 113bhp and 270Nm. Our expected figures for a Stage 1 remap are 141bhp and 321Nm, an expected gain of up to 28bhp and 51Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 113 bhp | 141 bhp | +28 bhp |
| Torque | 270 Nm | 321 Nm | +51 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 113 bhp | 270 Nm | |
| Stage 1Maximum software-only performance | 141 bhp | 321 Nm | +28 bhp +51 Nm |
| Stage 1 EcoPerformance with economy in mind | 134 bhp | 317 Nm | +21 bhp +47 Nm |
| Eco mapEconomy first | 132 bhp | 314 Nm | +19 bhp +44 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Connect
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Siemens SID807. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Ford Connect 1.6 TDCi 113bhp?
We expect 141bhp and 321Nm against 113bhp and 270Nm as standard: up to +28bhp and +51Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Ford Connect 1.6 TDCi 113bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 134bhp and 317Nm expected. The Eco map is economy first: 132bhp and 314Nm. Both still sit above the standard 113bhp and 270Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Ford Connect figures
Other diesel variants
All diesel Connect variants · Connect 2014> overview · All Ford figures