Ford Bronco 2023> 2.3 EcoBoost 300bhp remap figures
Stock, this 2023> Ford Bronco petrol (2.3L) produces 300bhp and 441Nm. Our expected figures for a Stage 1 remap are 328bhp and 560Nm, an expected gain of up to 28bhp and 119Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 300 bhp | 328 bhp | +28 bhp |
| Torque | 441 Nm | 560 Nm | +119 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 300 bhp | 441 Nm | |
| Stage 1Maximum software-only performance | 328 bhp | 560 Nm | +28 bhp +119 Nm |
| Stage 1 EcoPerformance with economy in mind | 321 bhp | 550 Nm | +21 bhp +109 Nm |
| Eco mapEconomy first | 319 bhp | 545 Nm | +19 bhp +104 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Bronco
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
The ECU recorded for this variant is a Bosch MG1CS017. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Ford Bronco 2.3 EcoBoost 300bhp?
We expect 328bhp and 560Nm against 300bhp and 441Nm as standard: up to +28bhp and +119Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Ford Bronco 2.3 EcoBoost 300bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 321bhp and 550Nm expected. The Eco map is economy first: 319bhp and 545Nm. Both still sit above the standard 300bhp and 441Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.