Ford Bronco 2020> 2.3 EcoBoost 270bhp remap figures
Stock, this 2020> Ford Bronco petrol (2.3L) produces 270bhp and 420Nm. Our expected figures for a Stage 1 remap are 315bhp and 520Nm, an expected gain of up to 45bhp and 100Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 270 bhp | 315 bhp | +45 bhp |
| Torque | 420 Nm | 520 Nm | +100 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 270 bhp | 420 Nm | |
| Stage 1Maximum software-only performance | 315 bhp | 520 Nm | +45 bhp +100 Nm |
| Stage 1 EcoPerformance with economy in mind | 304 bhp | 512 Nm | +34 bhp +92 Nm |
| Eco mapEconomy first | 300 bhp | 507 Nm | +30 bhp +87 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Bronco
On a turbocharged petrol engine a remap adjusts boost, ignition timing and fuelling together, so both power and mid-range torque rise and the car pulls harder out of corners and junctions.
The ECU recorded for this variant is a Bosch MG1CS017. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Ford Bronco 2.3 EcoBoost 270bhp?
We expect 315bhp and 520Nm against 270bhp and 420Nm as standard: up to +45bhp and +100Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Ford Bronco 2.3 EcoBoost 270bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 304bhp and 512Nm expected. The Eco map is economy first: 300bhp and 507Nm. Both still sit above the standard 270bhp and 420Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.