Ferrari Roma 2020> 3.9 V8 Twin Turbo 612bhp remap figures
Thinking of remapping a Ferrari Roma 3.9 V8 Twin Turbo 612bhp? The standard car makes 612bhp and 761Nm; with a Stage 1 remap from our Leicester workshop we expect around 725bhp and 1090Nm, up to +113bhp and +329Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 612 bhp | 725 bhp | +113 bhp |
| Torque | 761 Nm | 1090 Nm | +329 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 612 bhp | 761 Nm | |
| Stage 1Maximum software-only performance | 725 bhp | 1090 Nm | +113 bhp +329 Nm |
| Stage 1 EcoPerformance with economy in mind | 697 bhp | 1064 Nm | +85 bhp +303 Nm |
| Eco mapEconomy first | 688 bhp | 1047 Nm | +76 bhp +286 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Roma
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
The ECU recorded for this variant is a Bosch MED17.3.5. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Ferrari Roma 3.9 V8 Twin Turbo 612bhp?
We expect 725bhp and 1090Nm against 612bhp and 761Nm as standard: up to +113bhp and +329Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Ferrari Roma 3.9 V8 Twin Turbo 612bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 697bhp and 1064Nm expected. The Eco map is economy first: 688bhp and 1047Nm. Both still sit above the standard 612bhp and 761Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Ferrari Roma figures
Other petrol variants
All petrol Roma variants · Roma 2020> overview · All Ferrari figures