DS 9 2020> E-Tense 300 Hybrid 296bhp Stage 1 Eco remap figures
The Stage 1 Eco map for the DS 9 E-Tense 300 Hybrid 296bhp (2020>): 318bhp and 570Nm expected from a standard 296bhp and 519Nm, up to +22bhp and +51Nm. It keeps most of the Stage 1 gain (Stage 1 is 325bhp and 574Nm) and is tuned with economy in mind: the choice if you want the performance and care what each tank costs.
Choose your map
Stage 1 Eco remap figures
Stage 1 Eco is performance with economy in mind. It keeps most of the Stage 1 gain, so the car still pulls well, but the map is shaped for efficient, relaxed driving rather than flat-out output. It is above the standard figures. We don't quote mpg, because economy depends on the car and how it is driven.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 296 bhp | 318 bhp | +22 bhp |
| Torque | 519 Nm | 570 Nm | +51 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 296 bhp | 519 Nm | |
| Stage 1Maximum software-only performance | 325 bhp | 574 Nm | +29 bhp +55 Nm |
| Stage 1 EcoPerformance with economy in mind | 318 bhp | 570 Nm | +22 bhp +51 Nm |
| Eco mapEconomy first | 315 bhp | 567 Nm | +19 bhp +48 Nm |
Who is the Stage 1 Eco map for?
- Naturally aspirated owners who want a little more response and a more efficient, relaxed drive. Every map we list stays above standard.
- Drivers who want the small gain on offer without chasing peak output.
- Anyone who would otherwise take the full Stage 1 map but wants it tuned with economy in mind.
How Stage 1 Eco compares with Stage 1
Full Stage 1 on this DS 9 is expected to give 325bhp and 574Nm (+29bhp, +55Nm). The Stage 1 Eco keeps about 76% of that power gain and 93% of the torque gain, so you get 318bhp and 570Nm: 7bhp less and 4Nm less than Stage 1, with the map shaped for efficient, relaxed driving, so it suits you if you want the pull and care about running costs. Both sit above the standard 296bhp and 519Nm.
What this means for your 9
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
This car is listed with a Bosch MG1CS042 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 Eco questions
How much power does the Stage 1 Eco map give the DS 9 E-Tense 300 Hybrid 296bhp?
We expect 318bhp and 570Nm against 296bhp and 519Nm as standard: up to +22bhp and +51Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
How does Stage 1 Eco differ from Stage 1 on this engine?
Full Stage 1 is expected to give 325bhp and 574Nm. Stage 1 Eco gives 7bhp less and 4Nm less, in exchange for a map shaped with economy in mind. It still sits above the standard figures.
Is Stage 1 Eco or the Eco map better for me?
Choose Stage 1 Eco if you want the performance (318bhp and 570Nm) and still care about running costs. Choose the Eco map (315bhp and 567Nm) if economy matters more than pace.
Will the Stage 1 Eco map save fuel?
It is tuned with economy in mind while keeping most of the Stage 1 performance. We do not quote mpg figures, because economy depends on the car, its condition and how it is driven.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.