DS 9 2020> E-Tense 360 Hybrid 355bhp remap figures
Thinking of remapping a DS 9 E-Tense 360 Hybrid 355bhp? The standard car makes 355bhp and 519Nm; with a Stage 1 remap from our Leicester workshop we expect around 380bhp and 574Nm, up to +25bhp and +55Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 355 bhp | 380 bhp | +25 bhp |
| Torque | 519 Nm | 574 Nm | +55 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 355 bhp | 519 Nm | |
| Stage 1Maximum software-only performance | 380 bhp | 574 Nm | +25 bhp +55 Nm |
| Stage 1 EcoPerformance with economy in mind | 374 bhp | 570 Nm | +19 bhp +51 Nm |
| Eco mapEconomy first | 372 bhp | 567 Nm | +17 bhp +48 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your 9
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
This car is listed with a Bosch MG1CS042 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the DS 9 E-Tense 360 Hybrid 355bhp?
We expect 380bhp and 574Nm against 355bhp and 519Nm as standard: up to +25bhp and +55Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the DS 9 E-Tense 360 Hybrid 355bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 374bhp and 570Nm expected. The Eco map is economy first: 372bhp and 567Nm. Both still sit above the standard 355bhp and 519Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.