Cupra Ateca 2020> 2.0 TSI 300bhp Stage 1 Eco remap figures
The Stage 1 Eco map for the Cupra Ateca 2.0 TSI 300bhp (2020>): 374bhp and 537Nm expected from a standard 300bhp and 400Nm, up to +74bhp and +137Nm. It keeps most of the Stage 1 gain (Stage 1 is 398bhp and 549Nm) and is tuned with economy in mind: the choice if you want the performance and care what each tank costs.
Choose your map
Stage 1 Eco remap figures
Stage 1 Eco is performance with economy in mind. It keeps most of the Stage 1 gain, so the car still pulls well, but the map is shaped for efficient, relaxed driving rather than flat-out output. It is above the standard figures. We don't quote mpg, because economy depends on the car and how it is driven.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 300 bhp | 374 bhp | +74 bhp |
| Torque | 400 Nm | 537 Nm | +137 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 300 bhp | 400 Nm | |
| Stage 1Maximum software-only performance | 398 bhp | 549 Nm | +98 bhp +149 Nm |
| Stage 1 EcoPerformance with economy in mind | 374 bhp | 537 Nm | +74 bhp +137 Nm |
| Eco mapEconomy first | 366 bhp | 530 Nm | +66 bhp +130 Nm |
Who is the Stage 1 Eco map for?
- Drivers who want a quicker, more responsive car, tuned with economy in mind.
- Daily drivers who want strong mid-range pull without giving up efficiency.
- Anyone who would otherwise take full Stage 1 but cares what each tank costs.
How Stage 1 Eco compares with Stage 1
Full Stage 1 on this Cupra Ateca is expected to give 398bhp and 549Nm (+98bhp, +149Nm). The Stage 1 Eco keeps about 76% of that power gain and 92% of the torque gain, so you get 374bhp and 537Nm: 24bhp less and 12Nm less than Stage 1, with the map shaped for efficient, relaxed driving, so it suits you if you want the pull and care about running costs. Both sit above the standard 300bhp and 400Nm.
What this means for your Ateca
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
Engine management is by a Continental Simos 19.6 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 Eco questions
How much power does the Stage 1 Eco map give the Cupra Ateca 2.0 TSI 300bhp?
We expect 374bhp and 537Nm against 300bhp and 400Nm as standard: up to +74bhp and +137Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
How does Stage 1 Eco differ from Stage 1 on this engine?
Full Stage 1 is expected to give 398bhp and 549Nm. Stage 1 Eco gives 24bhp less and 12Nm less, in exchange for a map shaped with economy in mind. It still sits above the standard figures.
Is Stage 1 Eco or the Eco map better for me?
Choose Stage 1 Eco if you want the performance (374bhp and 537Nm) and still care about running costs. Choose the Eco map (366bhp and 530Nm) if economy matters more than pace.
Will the Stage 1 Eco map save fuel?
It is tuned with economy in mind while keeping most of the Stage 1 performance. We do not quote mpg figures, because economy depends on the car, its condition and how it is driven.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Cupra Ateca figures
Other petrol variants
All petrol Ateca variants · Ateca 2018> overview · All Cupra figures