Cupra Ateca 2020> 2.0 TSI 300bhp remap figures
The Cupra Ateca 2.0 TSI 300bhp (2020>) is a petrol 2.0L model making 300bhp and 400Nm as standard. After a Stage 1 ECU remap we expect 398bhp and 549Nm - up to 98bhp and 149Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 300 bhp | 398 bhp | +98 bhp |
| Torque | 400 Nm | 549 Nm | +149 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 300 bhp | 400 Nm | |
| Stage 1Maximum software-only performance | 398 bhp | 549 Nm | +98 bhp +149 Nm |
| Stage 1 EcoPerformance with economy in mind | 374 bhp | 537 Nm | +74 bhp +137 Nm |
| Eco mapEconomy first | 366 bhp | 530 Nm | +66 bhp +130 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Ateca
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
Engine management is by a Continental Simos 19.6 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Cupra Ateca 2.0 TSI 300bhp?
We expect 398bhp and 549Nm against 300bhp and 400Nm as standard: up to +98bhp and +149Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Cupra Ateca 2.0 TSI 300bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 374bhp and 537Nm expected. The Eco map is economy first: 366bhp and 530Nm. Both still sit above the standard 300bhp and 400Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Cupra Ateca figures
Other petrol variants
All petrol Ateca variants · Ateca 2018> overview · All Cupra figures