BMW 7 Series (G11) 2016-2018 M760Li 601bhp remap figures
The BMW 7 Series M760Li 601bhp (2016-2018) is a petrol 6.6L model making 601bhp and 800Nm as standard. After a Stage 1 ECU remap we expect 701bhp and 1041Nm - up to 100bhp and 241Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 601 bhp | 701 bhp | +100 bhp |
| Torque | 800 Nm | 1041 Nm | +241 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 601 bhp | 800 Nm | |
| Stage 1Maximum software-only performance | 701 bhp | 1041 Nm | +100 bhp +241 Nm |
| Stage 1 EcoPerformance with economy in mind | 676 bhp | 1022 Nm | +75 bhp +222 Nm |
| Eco mapEconomy first | 668 bhp | 1010 Nm | +67 bhp +210 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your 7 Series
Naturally aspirated petrol engines have no boost to raise, so gains from software alone are more modest than on a turbocharged car and come from fuelling, ignition and throttle response.
Engine management is by a Bosch MG1CS003 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the BMW 7 Series M760Li 601bhp?
We expect 701bhp and 1041Nm against 601bhp and 800Nm as standard: up to +100bhp and +241Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the BMW 7 Series M760Li 601bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 676bhp and 1022Nm expected. The Eco map is economy first: 668bhp and 1010Nm. Both still sit above the standard 601bhp and 800Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More BMW 7 Series figures
Other petrol variants
- M760Li 576bhp 2019>
- 750i xDrive 522bhp 2019>
- 750i 442bhp 2016-2019
- 740i 335bhp 2019>
- 740Le 322bhp 2017>
- 740i 321bhp 2015-2018
All petrol 7 Series (G11) variants · 7 Series (G11) 2015> overview · All BMW figures