BMW 7 Series (G11) 2019> M760Li 576bhp remap figures
The BMW 7 Series M760Li 576bhp (2019>) is a petrol 6.6L model making 576bhp and 850Nm as standard. After a Stage 1 ECU remap we expect 701bhp and 1041Nm - up to 125bhp and 191Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 576 bhp | 701 bhp | +125 bhp |
| Torque | 850 Nm | 1041 Nm | +191 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 576 bhp | 850 Nm | |
| Stage 1Maximum software-only performance | 701 bhp | 1041 Nm | +125 bhp +191 Nm |
| Stage 1 EcoPerformance with economy in mind | 670 bhp | 1026 Nm | +94 bhp +176 Nm |
| Eco mapEconomy first | 660 bhp | 1016 Nm | +84 bhp +166 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your 7 Series
Naturally aspirated petrol engines have no boost to raise, so gains from software alone are more modest than on a turbocharged car and come from fuelling, ignition and throttle response.
This car is listed with a Bosch MG1CS201 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the BMW 7 Series M760Li 576bhp?
We expect 701bhp and 1041Nm against 576bhp and 850Nm as standard: up to +125bhp and +191Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the BMW 7 Series M760Li 576bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 670bhp and 1026Nm expected. The Eco map is economy first: 660bhp and 1016Nm. Both still sit above the standard 576bhp and 850Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More BMW 7 Series figures
Other petrol variants
- M760Li 601bhp 2016-2018
- 750i xDrive 522bhp 2019>
- 750i 442bhp 2016-2019
- 740i 335bhp 2019>
- 740Le 322bhp 2017>
- 740i 321bhp 2015-2018
All petrol 7 Series (G11) variants · 7 Series (G11) 2015> overview · All BMW figures