BMW 7 Series (G11) 2015> 750d 394bhp remap figures
Thinking of remapping a BMW 7 Series 750d 394bhp? The standard car makes 394bhp and 761Nm; with a Stage 1 remap from our Leicester workshop we expect around 474bhp and 857Nm, up to +80bhp and +96Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 394 bhp | 474 bhp | +80 bhp |
| Torque | 761 Nm | 857 Nm | +96 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 394 bhp | 761 Nm | |
| Stage 1Maximum software-only performance | 474 bhp | 857 Nm | +80 bhp +96 Nm |
| Stage 1 EcoPerformance with economy in mind | 454 bhp | 849 Nm | +60 bhp +88 Nm |
| Eco mapEconomy first | 448 bhp | 845 Nm | +54 bhp +84 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your 7 Series
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Bosch MD1CP002. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the BMW 7 Series 750d 394bhp?
We expect 474bhp and 857Nm against 394bhp and 761Nm as standard: up to +80bhp and +96Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the BMW 7 Series 750d 394bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 454bhp and 849Nm expected. The Eco map is economy first: 448bhp and 845Nm. Both still sit above the standard 394bhp and 761Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More BMW 7 Series figures
Other diesel variants
All diesel 7 Series (G11) variants · 7 Series (G11) 2015> overview · All BMW figures