BMW 7 Series (G11) 2019> 730d MH 282bhp remap figures
Stock, this 2019> BMW 7 Series diesel (3.0L) produces 282bhp and 649Nm. Our expected figures for a Stage 1 remap are 375bhp and 829Nm, an expected gain of up to 93bhp and 180Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 282 bhp | 375 bhp | +93 bhp |
| Torque | 649 Nm | 829 Nm | +180 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 282 bhp | 649 Nm | |
| Stage 1Maximum software-only performance | 375 bhp | 829 Nm | +93 bhp +180 Nm |
| Stage 1 EcoPerformance with economy in mind | 352 bhp | 815 Nm | +70 bhp +166 Nm |
| Eco mapEconomy first | 344 bhp | 806 Nm | +62 bhp +157 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your 7 Series
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Bosch MD1CP032. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the BMW 7 Series 730d MH 282bhp?
We expect 375bhp and 829Nm against 282bhp and 649Nm as standard: up to +93bhp and +180Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the BMW 7 Series 730d MH 282bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 352bhp and 815Nm expected. The Eco map is economy first: 344bhp and 806Nm. Both still sit above the standard 282bhp and 649Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More BMW 7 Series figures
Other diesel variants
All diesel 7 Series (G11) variants · 7 Series (G11) 2015> overview · All BMW figures