BMW 1 Series (E8X) 2004-2011 130i 261bhp remap figures
Stock, this 2004-2011 BMW 1 Series petrol (3.0L) produces 261bhp and 315Nm. Our expected figures for a Stage 1 remap are 284bhp and 344Nm, an expected gain of up to 23bhp and 29Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 261 bhp | 284 bhp | +23 bhp |
| Torque | 315 Nm | 344 Nm | +29 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 261 bhp | 315 Nm | |
| Stage 1Maximum software-only performance | 284 bhp | 344 Nm | +23 bhp +29 Nm |
| Stage 1 EcoPerformance with economy in mind | 278 bhp | 342 Nm | +17 bhp +27 Nm |
| Eco mapEconomy first | 276 bhp | 340 Nm | +15 bhp +25 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your 1 Series
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
The ECU recorded for this variant is a Siemens MSV70. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the BMW 1 Series 130i 261bhp?
We expect 284bhp and 344Nm against 261bhp and 315Nm as standard: up to +23bhp and +29Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the BMW 1 Series 130i 261bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 278bhp and 342Nm expected. The Eco map is economy first: 276bhp and 340Nm. Both still sit above the standard 261bhp and 315Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More BMW 1 Series figures
Other petrol variants
- 135i (N54) 301bhp 2004-2011
- 135i (N55) 301bhp 2004-2011
- 125i 214bhp 2004-2011
- 1M 335bhp 2004-2011
- 120i 167bhp 2004-2011
- 120i 147bhp 2004-2011
- 118i 140bhp 2004-2011
- 118i 127bhp 2004-2011
- 116i (1.6) 120bhp 2007-2009
- 116i (2.0) 120bhp 2009-2011
All petrol 1 Series (E8X) variants ยท 1 Series (E8X) 2004-2011 overview ยท All BMW figures
