Audi TTS (8J) 2008-2013 2.0 TFSI 268bhp remap figures
Thinking of remapping a Audi TTS 2.0 TFSI 268bhp? The standard car makes 268bhp and 350Nm; with a Stage 1 remap from our Leicester workshop we expect around 320bhp and 416Nm, up to +52bhp and +66Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 268 bhp | 320 bhp | +52 bhp |
| Torque | 350 Nm | 416 Nm | +66 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 268 bhp | 350 Nm | |
| Stage 1Maximum software-only performance | 320 bhp | 416 Nm | +52 bhp +66 Nm |
| Stage 1 EcoPerformance with economy in mind | 307 bhp | 411 Nm | +39 bhp +61 Nm |
| Eco mapEconomy first | 303 bhp | 407 Nm | +35 bhp +57 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your TTS
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
The ECU recorded for this variant is a Bosch MED9.1.5. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi TTS 2.0 TFSI 268bhp?
We expect 320bhp and 416Nm against 268bhp and 350Nm as standard: up to +52bhp and +66Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi TTS 2.0 TFSI 268bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 307bhp and 411Nm expected. The Eco map is economy first: 303bhp and 407Nm. Both still sit above the standard 268bhp and 350Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Audi TTS figures
Other petrol variants
All petrol TTS (8J) variants · TTS (8J) 2006-2013 overview · All Audi figures