Audi SQ5 2019> 3.0 V6 TDi 342bhp remap figures
Stock, this 2019> Audi SQ5 diesel (3.0L) produces 342bhp and 700Nm. Our expected figures for a Stage 1 remap are 415bhp and 846Nm, an expected gain of up to 73bhp and 146Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 342 bhp | 415 bhp | +73 bhp |
| Torque | 700 Nm | 846 Nm | +146 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 342 bhp | 700 Nm | |
| Stage 1Maximum software-only performance | 415 bhp | 846 Nm | +73 bhp +146 Nm |
| Stage 1 EcoPerformance with economy in mind | 397 bhp | 834 Nm | +55 bhp +134 Nm |
| Eco mapEconomy first | 391 bhp | 827 Nm | +49 bhp +127 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your SQ5
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Bosch MD1CP004. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi SQ5 3.0 V6 TDi 342bhp?
We expect 415bhp and 846Nm against 342bhp and 700Nm as standard: up to +73bhp and +146Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi SQ5 3.0 V6 TDi 342bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 397bhp and 834Nm expected. The Eco map is economy first: 391bhp and 827Nm. Both still sit above the standard 342bhp and 700Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Audi SQ5 figures
Other diesel variants
All diesel SQ5 variants · SQ5 2018> overview · All Audi figures