Audi S7 2019> 2.9 TFSi 443bhp remap figures
Stock, this 2019> Audi S7 petrol (2.9L) produces 443bhp and 601Nm. Our expected figures for a Stage 1 remap are 524bhp and 771Nm, an expected gain of up to 81bhp and 170Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 443 bhp | 524 bhp | +81 bhp |
| Torque | 601 Nm | 771 Nm | +170 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 443 bhp | 601 Nm | |
| Stage 1Maximum software-only performance | 524 bhp | 771 Nm | +81 bhp +170 Nm |
| Stage 1 EcoPerformance with economy in mind | 504 bhp | 757 Nm | +61 bhp +156 Nm |
| Eco mapEconomy first | 497 bhp | 749 Nm | +54 bhp +148 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your S7
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
This car is listed with a Bosch MG1CS002 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi S7 2.9 TFSi 443bhp?
We expect 524bhp and 771Nm against 443bhp and 601Nm as standard: up to +81bhp and +170Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi S7 2.9 TFSi 443bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 504bhp and 757Nm expected. The Eco map is economy first: 497bhp and 749Nm. Both still sit above the standard 443bhp and 601Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Audi S7 figures
Other petrol variants
All petrol S7 variants · S7 2019> overview · All Audi figures