Audi S3 (8P) 2004-2011 2.0 TFSI 265bhp remap figures
Stock, this 2004-2011 Audi S3 petrol (2.0L) produces 265bhp and 350Nm. Our expected figures for a Stage 1 remap are 320bhp and 416Nm, an expected gain of up to 55bhp and 66Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 265 bhp | 320 bhp | +55 bhp |
| Torque | 350 Nm | 416 Nm | +66 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 265 bhp | 350 Nm | |
| Stage 1Maximum software-only performance | 320 bhp | 416 Nm | +55 bhp +66 Nm |
| Stage 1 EcoPerformance with economy in mind | 306 bhp | 411 Nm | +41 bhp +61 Nm |
| Eco mapEconomy first | 302 bhp | 407 Nm | +37 bhp +57 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your S3
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
The ECU recorded for this variant is a Bosch ME9. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi S3 2.0 TFSI 265bhp?
We expect 320bhp and 416Nm against 265bhp and 350Nm as standard: up to +55bhp and +66Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi S3 2.0 TFSI 265bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 306bhp and 411Nm expected. The Eco map is economy first: 302bhp and 407Nm. Both still sit above the standard 265bhp and 350Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Audi S3 figures
Other petrol variants
All petrol S3 (8P) variants · S3 (8P) 2004-2011 overview · All Audi figures