Audi R8 2019> V10 Performance 611bhp remap figures
Thinking of remapping a Audi R8 V10 Performance 611bhp? The standard car makes 611bhp and 580Nm; with a Stage 1 remap from our Leicester workshop we expect around 650bhp and 612Nm, up to +39bhp and +32Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 611 bhp | 650 bhp | +39 bhp |
| Torque | 580 Nm | 612 Nm | +32 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 611 bhp | 580 Nm | |
| Stage 1Maximum software-only performance | 650 bhp | 612 Nm | +39 bhp +32 Nm |
| Stage 1 EcoPerformance with economy in mind | 640 bhp | 609 Nm | +29 bhp +29 Nm |
| Eco mapEconomy first | 637 bhp | 608 Nm | +26 bhp +28 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your R8
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
Engine management is by a Bosch MED17.1.1 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi R8 V10 Performance 611bhp?
We expect 650bhp and 612Nm against 611bhp and 580Nm as standard: up to +39bhp and +32Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi R8 V10 Performance 611bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 640bhp and 609Nm expected. The Eco map is economy first: 637bhp and 608Nm. Both still sit above the standard 611bhp and 580Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Audi R8 figures
Other petrol variants
All petrol R8 variants · R8 2015> overview · All Audi figures