Audi Q7 (4M) 2018> 55 TFSi-e 381bhp remap figures
The Audi Q7 55 TFSi-e 381bhp (2018>) is a petrol 3.0L model making 381bhp and 601Nm as standard. After a Stage 1 ECU remap we expect 495bhp and 751Nm - up to 114bhp and 150Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 381 bhp | 495 bhp | +114 bhp |
| Torque | 601 Nm | 751 Nm | +150 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 381 bhp | 601 Nm | |
| Stage 1Maximum software-only performance | 495 bhp | 751 Nm | +114 bhp +150 Nm |
| Stage 1 EcoPerformance with economy in mind | 467 bhp | 739 Nm | +86 bhp +138 Nm |
| Eco mapEconomy first | 457 bhp | 732 Nm | +76 bhp +131 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Q7
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
The ECU recorded for this variant is a Bosch MG1CS002. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi Q7 55 TFSi-e 381bhp?
We expect 495bhp and 751Nm against 381bhp and 601Nm as standard: up to +114bhp and +150Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi Q7 55 TFSi-e 381bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 467bhp and 739Nm expected. The Eco map is economy first: 457bhp and 732Nm. Both still sit above the standard 381bhp and 601Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Audi Q7 figures
Other petrol variants
All petrol Q7 (4M) variants · Q7 (4M) 2015> overview · All Audi figures