Audi Q7 (4L) 2008-2014 3.0 TDI 236bhp remap figures
The Audi Q7 3.0 TDI 236bhp (2008-2014) is a diesel 3.0L model making 236bhp and 551Nm as standard. After a Stage 1 ECU remap we expect 293bhp and 637Nm - up to 57bhp and 86Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 236 bhp | 293 bhp | +57 bhp |
| Torque | 551 Nm | 637 Nm | +86 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 236 bhp | 551 Nm | |
| Stage 1Maximum software-only performance | 293 bhp | 637 Nm | +57 bhp +86 Nm |
| Stage 1 EcoPerformance with economy in mind | 279 bhp | 630 Nm | +43 bhp +79 Nm |
| Eco mapEconomy first | 274 bhp | 626 Nm | +38 bhp +75 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Q7
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Bosch EDC17 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi Q7 3.0 TDI 236bhp?
We expect 293bhp and 637Nm against 236bhp and 551Nm as standard: up to +57bhp and +86Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi Q7 3.0 TDI 236bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 279bhp and 630Nm expected. The Eco map is economy first: 274bhp and 626Nm. Both still sit above the standard 236bhp and 551Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.