Audi Q5 2015> 2.0T FSI 226bhp remap figures
Stock, this 2015> Audi Q5 petrol (2.0L) produces 226bhp and 350Nm. Our expected figures for a Stage 1 remap are 305bhp and 446Nm, an expected gain of up to 79bhp and 96Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 226 bhp | 305 bhp | +79 bhp |
| Torque | 350 Nm | 446 Nm | +96 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 226 bhp | 350 Nm | |
| Stage 1Maximum software-only performance | 305 bhp | 446 Nm | +79 bhp +96 Nm |
| Stage 1 EcoPerformance with economy in mind | 285 bhp | 438 Nm | +59 bhp +88 Nm |
| Eco mapEconomy first | 279 bhp | 434 Nm | +53 bhp +84 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Q5
Naturally aspirated petrol engines have no boost to raise, so gains from software alone are more modest than on a turbocharged car and come from fuelling, ignition and throttle response.
The ECU recorded for this variant is a Continental Simos 12/18. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi Q5 2.0T FSI 226bhp?
We expect 305bhp and 446Nm against 226bhp and 350Nm as standard: up to +79bhp and +96Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi Q5 2.0T FSI 226bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 285bhp and 438Nm expected. The Eco map is economy first: 279bhp and 434Nm. Both still sit above the standard 226bhp and 350Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Audi Q5 figures
Other petrol variants
- 2.0T FSI 221bhp 2012>
- 2.0 TFSI 208bhp 2008>
- 3.2 FSI 261bhp 2008>
- 3.0 TFSI 268bhp 2012>
- 2.0 TFSI 177bhp 2008>
All petrol Q5 variants · Q5 2008-2017 overview · All Audi figures