Audi Q3 RS 2019> 2.5 20v TFSi 394bhp remap figures
The Audi Q3 RS 2.5 20v TFSi 394bhp (2019>) is a petrol 2.5L model making 394bhp and 480Nm as standard. After a Stage 1 ECU remap we expect 485bhp and 602Nm - up to 91bhp and 122Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 394 bhp | 485 bhp | +91 bhp |
| Torque | 480 Nm | 602 Nm | +122 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 394 bhp | 480 Nm | |
| Stage 1Maximum software-only performance | 485 bhp | 602 Nm | +91 bhp +122 Nm |
| Stage 1 EcoPerformance with economy in mind | 462 bhp | 592 Nm | +68 bhp +112 Nm |
| Eco mapEconomy first | 455 bhp | 586 Nm | +61 bhp +106 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Q3 RS
On a turbocharged petrol engine a remap adjusts boost, ignition timing and fuelling together, so both power and mid-range torque rise and the car pulls harder out of corners and junctions.
The ECU recorded for this variant is a Bosch MED17.1.62. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi Q3 RS 2.5 20v TFSi 394bhp?
We expect 485bhp and 602Nm against 394bhp and 480Nm as standard: up to +91bhp and +122Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi Q3 RS 2.5 20v TFSi 394bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 462bhp and 592Nm expected. The Eco map is economy first: 455bhp and 586Nm. Both still sit above the standard 394bhp and 480Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Audi Q3 RS figures
Other petrol variants
All petrol Q3 RS variants · Q3 RS 2018> overview · All Audi figures