Audi Q2 2016-2019 2.0 TDI 187bhp remap figures
Stock, this 2016-2019 Audi Q2 petrol (2.0L) produces 187bhp and 320Nm. Our expected figures for a Stage 1 remap are 248bhp and 462Nm, an expected gain of up to 61bhp and 142Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 187 bhp | 248 bhp | +61 bhp |
| Torque | 320 Nm | 462 Nm | +142 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 187 bhp | 320 Nm | |
| Stage 1Maximum software-only performance | 248 bhp | 462 Nm | +61 bhp +142 Nm |
| Stage 1 EcoPerformance with economy in mind | 233 bhp | 451 Nm | +46 bhp +131 Nm |
| Eco mapEconomy first | 228 bhp | 444 Nm | +41 bhp +124 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Q2
Naturally aspirated petrol engines have no boost to raise, so gains from software alone are more modest than on a turbocharged car and come from fuelling, ignition and throttle response.
This car is listed with a Bosch MG1CS111 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi Q2 2.0 TDI 187bhp?
We expect 248bhp and 462Nm against 187bhp and 320Nm as standard: up to +61bhp and +142Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi Q2 2.0 TDI 187bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 233bhp and 451Nm expected. The Eco map is economy first: 228bhp and 444Nm. Both still sit above the standard 187bhp and 320Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.