Audi Q2 2016> 1.6 TDI 113bhp remap figures
Thinking of remapping a Audi Q2 1.6 TDI 113bhp? The standard car makes 113bhp and 250Nm; with a Stage 1 remap from our Leicester workshop we expect around 155bhp and 324Nm, up to +42bhp and +74Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 113 bhp | 155 bhp | +42 bhp |
| Torque | 250 Nm | 324 Nm | +74 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 113 bhp | 250 Nm | |
| Stage 1Maximum software-only performance | 155 bhp | 324 Nm | +42 bhp +74 Nm |
| Stage 1 EcoPerformance with economy in mind | 145 bhp | 318 Nm | +32 bhp +68 Nm |
| Eco mapEconomy first | 141 bhp | 314 Nm | +28 bhp +64 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Q2
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
This car is listed with a Bosch EDC17C64 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi Q2 1.6 TDI 113bhp?
We expect 155bhp and 324Nm against 113bhp and 250Nm as standard: up to +42bhp and +74Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi Q2 1.6 TDI 113bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 145bhp and 318Nm expected. The Eco map is economy first: 141bhp and 314Nm. Both still sit above the standard 113bhp and 250Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Audi Q2 figures
Other diesel variants
All diesel Q2 variants · Q2 2016> overview · All Audi figures