Audi A8 (D4) 2010> 3.0 TDI 246bhp remap figures
The Audi A8 3.0 TDI 246bhp (2010>) is a diesel 3.0L model making 246bhp and 551Nm as standard. After a Stage 1 ECU remap we expect 293bhp and 630Nm - up to 47bhp and 79Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 246 bhp | 293 bhp | +47 bhp |
| Torque | 551 Nm | 630 Nm | +79 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 246 bhp | 551 Nm | |
| Stage 1Maximum software-only performance | 293 bhp | 630 Nm | +47 bhp +79 Nm |
| Stage 1 EcoPerformance with economy in mind | 281 bhp | 624 Nm | +35 bhp +73 Nm |
| Eco mapEconomy first | 277 bhp | 620 Nm | +31 bhp +69 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your A8
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
This car is listed with a Bosch EDC17CP44 engine control unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi A8 3.0 TDI 246bhp?
We expect 293bhp and 630Nm against 246bhp and 551Nm as standard: up to +47bhp and +79Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi A8 3.0 TDI 246bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 281bhp and 624Nm expected. The Eco map is economy first: 277bhp and 620Nm. Both still sit above the standard 246bhp and 551Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Audi A8 figures
Other diesel variants
All diesel A8 (D4) variants · A8 (D4) 2010-2017 overview · All Audi figures