Audi A8 (D2) 1994-2002 3.7 V8 40v 260bhp remap figures
Thinking of remapping a Audi A8 3.7 V8 40v 260bhp? The standard car makes 260bhp and 350Nm; with a Stage 1 remap from our Leicester workshop we expect around 293bhp and 393Nm, up to +33bhp and +43Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 260 bhp | 293 bhp | +33 bhp |
| Torque | 350 Nm | 393 Nm | +43 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 260 bhp | 350 Nm | |
| Stage 1Maximum software-only performance | 293 bhp | 393 Nm | +33 bhp +43 Nm |
| Stage 1 EcoPerformance with economy in mind | 285 bhp | 390 Nm | +25 bhp +40 Nm |
| Eco mapEconomy first | 282 bhp | 387 Nm | +22 bhp +37 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your A8
Naturally aspirated petrol engines have no boost to raise, so gains from software alone are more modest than on a turbocharged car and come from fuelling, ignition and throttle response.
Engine management is by a Bosch ME7.1.5 unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi A8 3.7 V8 40v 260bhp?
We expect 293bhp and 393Nm against 260bhp and 350Nm as standard: up to +33bhp and +43Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi A8 3.7 V8 40v 260bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 285bhp and 390Nm expected. The Eco map is economy first: 282bhp and 387Nm. Both still sit above the standard 260bhp and 350Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Audi A8 figures
Other petrol variants
All petrol A8 (D2) variants · A8 (D2) 1994-2002 overview · All Audi figures