Audi A6 (C7) 2011> 3.0 TDI 241bhp Stage 1 Eco remap figures
The Stage 1 Eco map for the Audi A6 3.0 TDI 241bhp (2011>): 280bhp and 626Nm expected from a standard 241bhp and 500Nm, up to +39bhp and +126Nm. It keeps most of the Stage 1 gain (Stage 1 is 293bhp and 637Nm) and is tuned with economy in mind: the choice if you want the performance and care what each tank costs.
Choose your map
Stage 1 Eco remap figures
Stage 1 Eco is performance with economy in mind. It keeps most of the Stage 1 gain, so the car still pulls well, but the map is shaped for efficient, relaxed driving rather than flat-out output. It is above the standard figures. We don't quote mpg, because economy depends on the car and how it is driven.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 241 bhp | 280 bhp | +39 bhp |
| Torque | 500 Nm | 626 Nm | +126 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 241 bhp | 500 Nm | |
| Stage 1Maximum software-only performance | 293 bhp | 637 Nm | +52 bhp +137 Nm |
| Stage 1 EcoPerformance with economy in mind | 280 bhp | 626 Nm | +39 bhp +126 Nm |
| Eco mapEconomy first | 276 bhp | 619 Nm | +35 bhp +119 Nm |
Who is the Stage 1 Eco map for?
- Drivers who want the pull of a remap for overtaking, motorways and towing, with the engine tuned with economy in mind.
- High-mileage drivers who want better performance and a more efficient everyday car in one map.
- Anyone who would otherwise take full Stage 1 but cares what each tank costs.
How Stage 1 Eco compares with Stage 1
Full Stage 1 on this Audi A6 is expected to give 293bhp and 637Nm (+52bhp, +137Nm). The Stage 1 Eco keeps about 75% of that power gain and 92% of the torque gain, so you get 280bhp and 626Nm: 13bhp less and 11Nm less than Stage 1, with the map shaped for efficient, relaxed driving, so it suits you if you want the pull and care about running costs. Both sit above the standard 241bhp and 500Nm.
What this means for your A6
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
Engine management is by a Bosch EDC17CP44 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 Eco questions
How much power does the Stage 1 Eco map give the Audi A6 3.0 TDI 241bhp?
We expect 280bhp and 626Nm against 241bhp and 500Nm as standard: up to +39bhp and +126Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
How does Stage 1 Eco differ from Stage 1 on this engine?
Full Stage 1 is expected to give 293bhp and 637Nm. Stage 1 Eco gives 13bhp less and 11Nm less, in exchange for a map shaped with economy in mind. It still sits above the standard figures.
Is Stage 1 Eco or the Eco map better for me?
Choose Stage 1 Eco if you want the performance (280bhp and 626Nm) and still care about running costs. Choose the Eco map (276bhp and 619Nm) if economy matters more than pace.
Will the Stage 1 Eco map save fuel?
It is tuned with economy in mind while keeping most of the Stage 1 performance. We do not quote mpg figures, because economy depends on the car, its condition and how it is driven.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.