Audi A4 (B9) 2015-2017 3.0 TDI 268bhp remap figures
Stock, this 2015-2017 Audi A4 diesel (3.0L) produces 268bhp and 601Nm. Our expected figures for a Stage 1 remap are 329bhp and 726Nm, an expected gain of up to 61bhp and 125Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 268 bhp | 329 bhp | +61 bhp |
| Torque | 601 Nm | 726 Nm | +125 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 268 bhp | 601 Nm | |
| Stage 1Maximum software-only performance | 329 bhp | 726 Nm | +61 bhp +125 Nm |
| Stage 1 EcoPerformance with economy in mind | 314 bhp | 716 Nm | +46 bhp +115 Nm |
| Eco mapEconomy first | 309 bhp | 710 Nm | +41 bhp +109 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your A4
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Bosch EDC17CP54. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi A4 3.0 TDI 268bhp?
We expect 329bhp and 726Nm against 268bhp and 601Nm as standard: up to +61bhp and +125Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi A4 3.0 TDI 268bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 314bhp and 716Nm expected. The Eco map is economy first: 309bhp and 710Nm. Both still sit above the standard 268bhp and 601Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Audi A4 figures
Other diesel variants
- 3.0 TDI 268bhp 2017>
- 50 TDI 281bhp 2019>
- 3.0 TDI 214bhp 2015-2016
- 3.0 TDI 214bhp 2015-2019
- 40 TDI 201bhp 2019>
- 2.0 TDI 187bhp 2015-2018
- 40 TDI 187bhp 2018-2019
- 35 TDI 163bhp 2019>
- 2.0 TDI 147bhp 2015-2018
- 30 TDI 134bhp 2019>
All diesel A4 (B9) variants · A4 (B9) 2015> overview · All Audi figures