Audi A3 (8P) 2003-2011 2.0 TDI CR 138bhp remap figures
Stock, this 2003-2011 Audi A3 diesel (2.0L) produces 138bhp and 320Nm. Our expected figures for a Stage 1 remap are 198bhp and 419Nm, an expected gain of up to 60bhp and 99Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 138 bhp | 198 bhp | +60 bhp |
| Torque | 320 Nm | 419 Nm | +99 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 138 bhp | 320 Nm | |
| Stage 1Maximum software-only performance | 198 bhp | 419 Nm | +60 bhp +99 Nm |
| Stage 1 EcoPerformance with economy in mind | 183 bhp | 411 Nm | +45 bhp +91 Nm |
| Eco mapEconomy first | 178 bhp | 406 Nm | +40 bhp +86 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your A3
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Bosch EDC17CP14/C46 unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Audi A3 2.0 TDI CR 138bhp?
We expect 198bhp and 419Nm against 138bhp and 320Nm as standard: up to +60bhp and +99Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Audi A3 2.0 TDI CR 138bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 183bhp and 411Nm expected. The Eco map is economy first: 178bhp and 406Nm. Both still sit above the standard 138bhp and 320Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Audi A3 figures
Other diesel variants
- 2.0 TDI PD 138bhp 2003-2011
- 2.0 TDI PD 138bhp 2006-2007
- 2.0 TDI PD 167bhp 2003-2011
- 2.0 TDI CR 170bhp 2008-2011
- 1.6 TDi 103bhp 2003-2011
- 1.9 TDI PD 103bhp 2003-2011
- 1.9 TDI PD 103bhp 2006-2011
All diesel A3 (8P) variants · A3 (8P) 2003-2011 overview · All Audi figures