Volvo Trucks FM9 2010> 9.4l EUR 5 D9B 360bhp remap figures
Thinking of remapping a Volvo Trucks FM9 9.4l EUR 5 D9B 360bhp? The standard car makes 360bhp and 1700Nm; with a Stage 1 remap from our Leicester workshop we expect around 415bhp and 1895Nm, up to +55bhp and +195Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 360 bhp | 415 bhp | +55 bhp |
| Torque | 1700 Nm | 1895 Nm | +195 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 360 bhp | 1700 Nm | |
| Stage 1Maximum software-only performance | 415 bhp | 1895 Nm | +55 bhp +195 Nm |
| Stage 1 EcoPerformance with economy in mind | 401 bhp | 1879 Nm | +41 bhp +179 Nm |
| Eco mapEconomy first | 397 bhp | 1870 Nm | +37 bhp +170 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your FM9
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Lucas B/C/D unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Volvo Trucks FM9 9.4l EUR 5 D9B 360bhp?
We expect 415bhp and 1895Nm against 360bhp and 1700Nm as standard: up to +55bhp and +195Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Volvo Trucks FM9 9.4l EUR 5 D9B 360bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 401bhp and 1879Nm expected. The Eco map is economy first: 397bhp and 1870Nm. Both still sit above the standard 360bhp and 1700Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Volvo Trucks FM9 figures
Other diesel variants
- 9.4l EUR 3 D9A 360bhp 2001>
- 9.4l EUR 4 D9B 360bhp 2007>
- 9.4l EUR 3 D9A 340bhp 2001>
- 9.4l EUR 3 D9A 380bhp 2001>
- 9.4l EUR 4 D9B 340bhp 2007>
- 9.4l EUR 4 D9B 380bhp 2007>
- 9.4l EUR 5 D9B 340bhp 2010>
- 9.4l EUR 5 D9B 380bhp 2010>
- 9.4l EUR 3 D9A 300bhp 2001>
- 9.4l EUR 4 D9B 300bhp 2007>
All diesel FM9 variants · FM9 2001> overview · All Volvo Trucks figures