Vauxhall Vivaro 2006-2012 2.0 CDTi 115bhp remap figures
Thinking of remapping a Vauxhall Vivaro 2.0 CDTi 115bhp? The standard car makes 115bhp and 290Nm; with a Stage 1 remap from our Leicester workshop we expect around 170bhp and 378Nm, up to +55bhp and +88Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 115 bhp | 170 bhp | +55 bhp |
| Torque | 290 Nm | 378 Nm | +88 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 115 bhp | 290 Nm | |
| Stage 1Maximum software-only performance | 170 bhp | 378 Nm | +55 bhp +88 Nm |
| Stage 1 EcoPerformance with economy in mind | 156 bhp | 371 Nm | +41 bhp +81 Nm |
| Eco mapEconomy first | 152 bhp | 367 Nm | +37 bhp +77 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Vivaro
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Bosch EDC16+C36. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Vauxhall Vivaro 2.0 CDTi 115bhp?
We expect 170bhp and 378Nm against 115bhp and 290Nm as standard: up to +55bhp and +88Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Vauxhall Vivaro 2.0 CDTi 115bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 156bhp and 371Nm expected. The Eco map is economy first: 152bhp and 367Nm. Both still sit above the standard 115bhp and 290Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Vauxhall Vivaro figures
Other diesel variants
All diesel Vivaro variants · Vivaro 2006-2012 overview · All Vauxhall figures