Vauxhall Vectra (C) 2006-2008 2.8 V6 VXR 251bhp remap figures
Stock, this 2006-2008 Vauxhall Vectra petrol (2.8L) produces 251bhp and 350Nm. Our expected figures for a Stage 1 remap are 315bhp and 459Nm, an expected gain of up to 64bhp and 109Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 251 bhp | 315 bhp | +64 bhp |
| Torque | 350 Nm | 459 Nm | +109 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 251 bhp | 350 Nm | |
| Stage 1Maximum software-only performance | 315 bhp | 459 Nm | +64 bhp +109 Nm |
| Stage 1 EcoPerformance with economy in mind | 299 bhp | 450 Nm | +48 bhp +100 Nm |
| Eco mapEconomy first | 294 bhp | 445 Nm | +43 bhp +95 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Vectra
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
The ECU recorded for this variant is a Bosch ME9.6. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Vauxhall Vectra 2.8 V6 VXR 251bhp?
We expect 315bhp and 459Nm against 251bhp and 350Nm as standard: up to +64bhp and +109Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Vauxhall Vectra 2.8 V6 VXR 251bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 299bhp and 450Nm expected. The Eco map is economy first: 294bhp and 445Nm. Both still sit above the standard 251bhp and 350Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Vauxhall Vectra figures
Other petrol variants
- 2.8 V6 246bhp 2006-2008
- 2.8T 230bhp 2006-2008
- 2.8 V6 VXR 276bhp 2006-2008
- 2.0T 172bhp 2005-2008
- 2.2 16v 152bhp 2006-2008
- 2.2 16v 144bhp 2002-2005
- 1.8 VVT 138bhp 2006-2008
All petrol Vectra (C) variants ยท Vectra (C) 2002-2008 overview ยท All Vauxhall figures
