Vauxhall Movano 2003-2011 2.5 CDTi 100bhp remap figures
The Vauxhall Movano 2.5 CDTi 100bhp (2003-2011) is a diesel 2.5L model making 100bhp and 290Nm as standard. After a Stage 2 ECU remap we expect 165bhp and 375Nm - up to 65bhp and 85Nm more than stock.
Choose your map
Stage 2 remap figures
Stage 2 builds on Stage 1 with supporting hardware - typically a freer-flowing intake and exhaust or downpipe - and a remap written around those parts. Stage 2 is intended for off-road or competition use.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 100 bhp | 165 bhp | +65 bhp |
| Torque | 290 Nm | 375 Nm | +85 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 100 bhp | 290 Nm | |
| Stage 2Extra power with supporting parts | 165 bhp | 375 Nm | +65 bhp +85 Nm |
Who is the Stage 2 map for?
- Owners who have fitted, or plan to fit, supporting parts such as a freer-flowing intake and exhaust.
- Enthusiast, track and competition cars: Stage 2 is intended for off-road or competition use.
- Drivers who accept that a bigger gain means more of the car has to be checked and prepared first.
What Stage 2 needs
Stage 2 is written around supporting hardware. For an engine like this one that is typically a freer-flowing intake, an upgraded intercooler and a less restrictive exhaust. We confirm the exact parts for your car before any work starts.
- A diagnostic check and a read of your ECU come first.
- We look at the condition of the parts that will carry the extra power before we quote.
- Stage 2 is intended for off-road or competition use.
What this means for your Movano
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Bosch EDC16+C36. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 2 questions
How much power does the Stage 2 map give the Vauxhall Movano 2.5 CDTi 100bhp?
We expect 165bhp and 375Nm against 100bhp and 290Nm as standard: up to +65bhp and +85Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
What does a Stage 2 remap need on the Vauxhall Movano 2.5 CDTi 100bhp?
Stage 2 assumes supporting hardware. For an engine like this that is typically a freer-flowing intake, an upgraded intercooler and a less restrictive exhaust. We confirm the exact parts for your car before any work starts.
Is Stage 2 for road use?
Stage 2 is intended for off-road or competition use. Tell us how the car is used and we will explain what we can and cannot do for it.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Vauxhall Movano figures
Other diesel variants
- 2.2 CDTi 90bhp 2003-2011
- 2.5 CDTi 115bhp 2003-2011
- 1.9 CDTi 82bhp 2003-2011
- 2.5 CDTi 120bhp 2003-2011
- 3.0 CDTi 136bhp 2003-2011
- 2.5 CDTi 146bhp 2003-2011
All diesel Movano variants · Movano 2003-2011 overview · All Vauxhall figures