Vauxhall Mokka 2015> 1.6 CDTi 108bhp remap figures
The Vauxhall Mokka 1.6 CDTi 108bhp (2015>) is a diesel 1.6L model making 108bhp and 300Nm as standard. After a Stage 1 ECU remap we expect 145bhp and 364Nm - up to 37bhp and 64Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 108 bhp | 145 bhp | +37 bhp |
| Torque | 300 Nm | 364 Nm | +64 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 108 bhp | 300 Nm | |
| Stage 1Maximum software-only performance | 145 bhp | 364 Nm | +37 bhp +64 Nm |
| Stage 1 EcoPerformance with economy in mind | 136 bhp | 359 Nm | +28 bhp +59 Nm |
| Eco mapEconomy first | 133 bhp | 356 Nm | +25 bhp +56 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Mokka
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Delco E98 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Vauxhall Mokka 1.6 CDTi 108bhp?
We expect 145bhp and 364Nm against 108bhp and 300Nm as standard: up to +37bhp and +64Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Vauxhall Mokka 1.6 CDTi 108bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 136bhp and 359Nm expected. The Eco map is economy first: 133bhp and 356Nm. Both still sit above the standard 108bhp and 300Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Vauxhall Mokka figures
Other diesel variants
All diesel Mokka variants · Mokka 2012> overview · All Vauxhall figures